Telco Card is one of the smart card produced by PT JST and is in conformity with international standard ISO 7810. These cards are used in the telecommunications industry in various countries.
These cards are made using the main material of PVC and storage media Data on contact (chip), and other high quality supporting material. Design or artwork can be determined by the customer.
The system controller features an easy-to-use graphical interface plus the hardware and software required to control the activities of each card personalization module, data and the system as a whole.
The card input module on the MPR5800 system feeds cards reliably into the system. Multiple card input modules can be installed in a system to increase capacity for large jobs.
Smart card personalization
The barrel smart card module on the MPR5800 system personalizes single or double SIM cards in the same module with impressive speed, accuracy and security. Multiple smart card couplers are also available.
This system can be configured to flip the SIM card to enable back side laser engraving of the card.
The laser engraving module on the MPR5800 system utilizes the latest in engraving technology to deliver high-speed, high-quality laser imaging of cards.
The card output module on the MPR5800 system is designed with two trays: one tray for good cards, one tray for rejected cards. Multiple card output modules may be installed within a system in order to expand output capacity, or to allow card groupings to be separated for quality control, downstream processing/handling or for varying methods.
Artwork Requirements for Full Colour Plastic Cards
We can accept artwork in any of the programs shown below.
Please send your artwork to email@example.com.
If you are unable to send suitable files please call (+62 21) 5552945 for advice.
Standard card size is 86 x 54mm with 3mm radius corners.
If you require your design to print to the card edge (bleed) then you will need to extend the image by 3mm all around the card, making an overall size of 92 x 60mm. Please ensure that any text or important images are at least 3mm inside the card edge (see dotted line on diagram).
We also supply larger card sizes of 100 x 70mm and 120 x 80mm. For these oversized cards the above rules regarding bleed and card content also applies.
|Chip||A Position (mm)||B Position (mm)||E Dimention (mm)||F Dimention (mm)|
|6 pin||18.33 - 18.40||9.50 - 9.60||8.27 ± 0.02||10.95 ± 0.02|
|8 pin||16.31 - 16.35||6.15 - 6.35||11.85 ± 0.02||13.00 ± 0.02|
|Plug||A Position (mm)||B Position (mm)||C Dimention (mm)||D Dimention (mm)|
|2FF (standard)||16.35 - 16.58||6.31 - 6.35||14.90 - 15.10||14.90 - 25.10|
|3FF (micro)||17.39 ± 0.1||8.1 ± 0.1||12 ± 0.1||15 ± 0.1|